Enabled for massive memory applications, the Thunder h2000M (S3992) provides support for up to (16) DDR2 Registered DIMMs. Also supporting a 2P AMD Opteron™ 2000 Series processor configuration, the S3992 includes support for PCI-X, PCI Express* , built-in video, SATA with RAID, TARO™ add-on card support, and remote management (IPMI 2.0; optional) all in an eATX (12" x 13") form factor. ( * Does not support PCIe Graphics Card )

Processor  • Dual 1207-pin sockets support AMD Opteron™      (Rev. F) 2000 series (dual/quad-core) processors  • Uses the standard 3 1/2"/ 89mm socket connector  • Integrated 128-bit DDR memory controller Chipset  • Broadcom BCM5780 (HT2000) + BCM5785      (HT1000) chipset  • National PC87417 Super I/O chip Memory   • 128-bit Dual channel memory bus  • (16x) 240-pin DDR2 DIMM slots • Support memory speeds of 400/533/677/800^   MHz  • Supports up to 64GB of Reg/ECC DDR2 memory  • Supports Single and Dual Rank memory*   ^ 800MHz DDR2 speed support available only at     4x Dimm’s per CPU or less   * (8x) Dual Rank memory per CPU will have a      maximum memory speed of 533MHz Expansion Slots  • (2) PCI-E x16 slots (each with x8 signal)  • (2) PCI-X 64-bit 133/100MHz slots  • (1) PCI-X 64-bit 100MHz slot  • (1) PCI 32-bit 33MHz v2.3 compliant slot  • (1) Tyan TARO™ SO-DIMM socket Integrated I/O Interfaces  • (1) Floppy connector  • (1) IDE connector  • (4) SATA ports  • (4) USB v2.0 ports (2 at rear, 2 via cable)  • (2) COM ports ( 1 at rear, 1 via cable)  • 2 x 9-pin front panel pin header  • 2 x 6-pin front panel pin header for LAN/ID LED  • 2 x 7-pin header (2.0mm) for FAN tachometer      and PWN  • 2 x 25-pin connector for IPMI SMDC card (option) Back Panel I/O Ports  • (1) Stacked PS/2 mouse and keyboard ports  • (2) Side-by-side RJ45 ports  • (2) Stacked USB 2.0 ports & (1) 10/100 RJ45 port  • (1) 9-pin COM port  • (1) 15-pin VGA port Integrated PCI Graphics  • ATI® ES1000 controller  • 32MB DDR frame buffer of video memory Integrated Enhanced IDE Controller  • Single-channel master mode supports up to      two IDE devices  • Supports IDE drives & ATAPI-compliant devices Integrated Serial ATA Controller  • (4) SATA ports at 1.5 Gb/s with NCQ supported  • RAID 0, 1, 5, and 10 supported  ^ 800MHz DDR2 speed support available only at      4x Dimm’s per CPU or less  * (8x) Dual Rank memory per CPU will have a     maximum memory speed of 533MHz

System Management  • (2) SMSC EMC6D103 hardware monitoring IC  • (4) 3+1-pin (with smart FAN control) + (2) 3-pin      fan headers support tachometer monitoring  • Temperature & voltage monitoring  • Watchdog timer support Integrated LAN Controllers  • Dual GbE LAN (from BCM5780)     - (2) 10/100/1000 RJ-45 LAN ports with LED     - Embedded in BCM5780  • One Intel i82551QM fast Ethernet controller     - (1) 10/100 RJ-45 LAN port with LED     - Operating on 32bit/33MHz PCI bus Optional Modules (SMDC/TSO Support)  • M3291, IPMI 2.0 Remote System Mgmt. card     - Renesas H8S2167 BMC controller     - BT, KCS, Logging support; IPMI-over-LAN     - Remote Power on/off and reset  • M7901/ M7902, Ultra 320 SCSI TARO™ card     - Adaptec AIC-7901/7902 single/dual-channel      Ultra320 SCSI controller     - Adaptec HostRAID 0, 1, 10 supported  • M9000 SAS/SATA II TARO™ card     - Adaptec AIC-9405/9410 SAS controller     - Supports up to 4-port (M9000-5) and 8-port      ( M9000-10 ) SAS & SATA running at 3.0 Gb/s     - Adaptec HostRAID 0, 1 & 10 supported BIOS  • AMI BIOS on 8Mbit LPC Flash ROM  • ACPI 2.0 and SRAT support  • PXE via Ethernet, USB device boot  • SMBIOS 2.3.1, BBS 1.1 compliant  • Headless Operation via serial console redirect  • 48-bit LBA support Power  • Onboard dual 4-phase VRM  • EPS 12V/SSI v3.51 (24+8) power connectors  • EPS/ATX 12V universal power connectors Form Factor  • Extended ATX footprint (12" x 13") Regulatory  • FCC Class B (Declaration of Conformity)  • European Community CE (DoC)