HydroFlow HF-MK1 CPU Waterblock / For AMD, AM2, 775, 1366 / Core i7 Compatible

Designed with the highest possible exchange rate between the block and coolant, the HydroFlow can be easily integrated into any enthusiast water cooled system and help efficiently lower the processor temperature. The HydroFlow is compatible with AMD and Intel processors, including the latest generation Core i7 CPUs.

The triangular fins in the HF-MK1 provide the highest volume to surface ratio of any geometric shape for best dissipation possible, and this special design also creates sufficient turbulence to eliminate the “skin” effect caused by laminar flow. The base block of the HydroFlow increases center contact with the processor core for the greatest possible cooling potential, ensuring maximum exchange and functionality between the waterblock and CPU.

Whether you’re a first-time builder or a seasoned case-modder, OCZ makes the HydroFlow easy to integrate into your rig by supplying both high-flow 3/8” and 1/2” barbs in the packaging without the hassle of searching for compatible hardware.

Speficiations
-For Sockets Intel LGA775 and 1366       
-For Sockets AMD 754/939/940/AM2       
-Pure Copper base       
-2-Year Warranty

Dimensions:       
-5.5 cm x 5.5 cm x 1.75 cm

Included Accessories:       
-1/2" and 3/8" barb adaptors       
-4 x Springs with Thumb Screws       
-4 x Hold Down Screws       
-4 x AMD Washers       
-8 x Intel Washers       
-4 x AMD / Intel Bolts       
-1 x AMD / Intel 775 / Intel 1366 Bracket       
-1 x Hex Key       
-1 x Generic thermal compound